How to Repair a Popcorn Ceiling That Has Peeled
- Lay a plastic drop cloth on the floor under the peeling ceiling to make cleanup easier later. ...
- Position a putty knife blade at an angle to the ceiling. Scrape over the peeling section to remove it.
- Cut a long strip off of another plastic drop cloth that is at least 6 feet long and 3 to 4 feet wide.
- Put on disposable gloves and shake up the can of acoustical texture for one to two minutes. Place your hand inside the plastic square you hung earlier.
- Allow the ceiling to dry for 24 hours and remove the pushpins and the tarp.
How to get popcorn walls smooth without scraping?
- Step two: Wipe the surface of the ceiling to smooth out any bumps or air bubbles in the joint compound. ...
- Step one: Turn off the power and remove light fixtures from the ceiling. ...
- Step two: Use a stud finder to mark the centers of joists on the ceiling. ...
How to a cover popcorn ceiling without removing it?
- You may need to patch some areas of drywall after the texture has been removed. ...
- Sand the ceiling once the repair work is dried but keep the sanding to a minimum so that you don’t damage any areas.
- If you come across a visible nail or screw below the surface, cover it with joint compound. ...
- Prime and paint your ceiling as desired.
How to smooth textured or popcorn walls?
- Remove the baseboard from the wall. ...
- Protect yourself and the rest of the room from falling wall texture. ...
- Lightly sand the surface of the painted texture if the paint is glossy. ...
- Wipe down the surface of the wall with clean damp rags. ...
How much does it cost to remove popcorn ceiling?
For some reason homeowners no longer understand, popcorn ceilings were popular in the 1960s and 1970s. Yet, we’ve since learned how much ... Labor costs for your area of the country 'A good rule of thumb,' she says, 'is that popcorn ceiling removal ...
How do you fix textured walls?
0:005:01Easiest way to repair knockdown texture on a wall patch ever!YouTubeStart of suggested clipEnd of suggested clipWelcome back to the channel in today's video I'm gonna show you the easiest way to repair knockdownMoreWelcome back to the channel in today's video I'm gonna show you the easiest way to repair knockdown texture on a wall patch. Ever I'll be using the knockdown texture sponge a lexan knockdown paddle
How do you change a popcorn wall to a flat wall?
You'll need to first apply a chemical stripper to break down the paint before removing the popcorn texture. Because this can be harmful when not in professional hands, most homeowners opt to have a professional come out and handle the painted popcorn texture removal.
How do you spackle popcorn walls?
0:071:33How to Repair Spackling on a Textured Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what we're going to do is. We're going to take put a little bit of mud onto our putty knife andMoreSo what we're going to do is. We're going to take put a little bit of mud onto our putty knife and put it right into the hole. Now we're going to clean up a little bit of the excess.
Can you smooth out popcorn walls?
If you do not want to scrape the ceiling or wall, you can try sanding. Use a coarse-grit pole sander across the whole surface. The popcorn wall finish should loosen and fall off easily. Be sure to sand evenly, starting in one corner and moving across the wall.
Can you plaster over popcorn walls?
Homeowners can cover over popcorn ceiling with plaster.
How do you make popcorn walls look good?
Four ways to get rid of unwanted textured walls:Apply a skim coat. ... Replace the textured drywall with new drywall. ... Cover the walls with another material, such as wood. ... Live with it.
How do you smooth textured walls without sanding?
Fill a pump sprayer with water and spray the entire wall evenly to soften the texture. You may have to spray the wall two or three times in order to saturate it sufficiently. Give the wall about 15 minutes of dwell time, then test the texture with a fingertip.
How do you smooth out a bumpy wall?
Use a special textured foam roller to apply mixed skim coat onto the wall.Working from the top of the wall down to the bottom, use a squeegee to lightly float the surface in one smooth, even stroke. ... The next stroke works from the bottom of the wall to the top, again applying a smooth, even stroke.More items...•
How to get popcorn texture off walls?
Secure them back into the walls or ceilings before you move on. Take a damp rag or cloth and wipe down any surface where you removed the popcorn texture. This will also give you one last opportunity to check that you successfully removed all of the popcorn texture before you move on.
How to get popcorn texture out of ceiling?
If you can get access to an outdoor garden hose, bring the hose into the room and start to spray small sections of the wall or ceiling at a time. Some sources suggest a four-foot-by-four-foot stretch at once.
How to protect popcorn from popcorn debris?
If just your walls or ceiling have unwanted texture, make sure you also cover whatever surface you want to protect from the popcorn debris. Repeat the process of covering your floor and mirror it on your walls or ceiling, careful to completely cover and secure it with plastic sheeting and masking tape.
What to use to secure popcorn texture?
Secure it with masking tape. Additionally, tape any areas you don’t want to get paint on, like molding, baseboards, flooring, walls or ceilings (depending on what you’re painting). Before you apply any paint, make a moment to dust any popcorn textures, as they are prone to collecting dust and cobwebs.
How to remove popcorn texture from a surface?
Using the same process as you would to remove popcorn texture from a surface, spray a small portion of the area with water, and using a razor-blade knife, cut out a small sample, immediately securing it in a closed container and mail it to a local testing service.
How to protect furniture from water damage?
Before you start scraping at your walls and ceilings, take time to protect your furniture from potential harm from tools, water or debris by removing it from the room or covering it up with plastic sheeting, securing any loose ends with masking tape.
How long does it take for water to absorb into a wall?
This means the water is absorbing properly. After spraying your small section, wait for 10 – 15 minutes to start scraping, as the water will need to be completely absorbed to soften the surface and loosen the texture.
3 Reasons Why Builders Used Popcorn Finish
During those times, builders used this finish to hide uneven areas in walls and ceilings.
Why Should You Check for Asbestos Content in Your Popcorn Ceiling?
Asbestos is a hazardous material that can cause many serious health risks.
Popcorn Finish Removal Procedure
The first thing that you need to do is gather and prepare your materials.
Summary
Now that you’ve read this article, removing your popcorn walls and ceilings shouldn’t be a problem.
Latest Posts
DIY guru, dad, husband, blogger. When I'm not creating life hacks I'm teaching my kids how to fix stuff after their dad breaks it.
Before You Begin
It’s not difficult to patch a popcorn ceiling, but it does require a little bit of prep work ahead of time. With a step-by-step like this one, most DIYers are qualified to tackle this task. Like any home renovation project, make sure you have all the tools and supplies you will need before you begin so you don’t have to stop partway through.
How to Fix a Popcorn Ceiling (6 Steps)
If you’ve ever watched someone patch a popcorn ceiling on those home renovation shows, you will notice one of two things. Either the room they are working in will be empty, or plastic will cover any furniture. This is due to the sheer amount of dust that will result from this project. It also protects from any damage from paint splatter at the end.
Fixing a Small Hole in the Ceiling
If you find only a small hole in the ceiling once you scrape the old texture off, then it’s not necessary to cut a huge chunk out. Filling the hole with joint compound and embedding a piece of tape across the hole will be sufficient. After embedding the tape, make sure you still give it a final coat of compound to smooth it out.
Conclusion
As you can see in this straightforward step-by-step, it doesn’t take any special training to patch a popcorn ceiling. However, if this is your first time doing any drywall work, prepare for a little bit of frustration. Mudding and taping is an art, but the beauty of popcorn texture is that it hides many of the imperfections.
How do I knock down a plexiglass wall?
Run the blade of an 18- or 24-inch Plexiglass knife lightly over the surface of the wall, a process known as knocking down, because you knock down the peaks of the raised top coat. Run the knife two-thirds of the way from the ceiling to the floor, applying light pressure. Knock down the last section of the wall by running the blade from the floor to cover the bottom-third of the wall. Allow the top coat to dry.
How to apply joint compound to a wall?
Begin in one of the upper corners of the wall, applying the joint compound to the wall. Keep the nozzle 30 to 36 inches away from the wall, and hold the trigger halfway in as you apply the joint compound. Move the nozzle from side-to-side, covering an area that measures about 3 feet square before moving on to the next section. Wear safety goggles when spraying the wall. Allow the base coat to dry for at least 8 hours.
How to apply texture to a room?
Prepare the room for applying the texture. Remove any furniture you can, and cover any remaining pieces with a tarp. Cover the floor with a tarp to protect the surface. Tape plastic sheets over the windows and doors.