How to Fix a Toilet Paper Hanger Coming Out of the Wall
- Remove the paper and roller from the arms of the holder.
- Loosen the small setscrews at the rim of each trim cover and arm assembly with the appropriate Allen key or a jeweler's screwdriver.
- Loosen and remove the screws that secure each mounting plate at the wall with a standard screwdriver and pull off the brackets.
How do you fix a loose toilet paper holder?
Insert the screwdriver or Allen key into the screw and tighten it firmly until the toilet paper holder is firmly back on the wall. If the loose holder isn't fixed right away, the downward pressure of the loose arm may make the screw in the wall loosen as well.
How are toilet paper holders held in place?
Toilet paper holders are held in place by tiny screws that hold the decorative portion onto a wall bracket screwed into the wall. Normal pushing and pulling on the decorative arms during the placing and removing of toilet paper rolls can loosen the screws that hold the roll in place, making the holder too loose to do its job.
How do I remove the paper and roller from the trim?
A do-it-yourself homeowner can do the job with basic tools. Remove the paper and roller from the arms of the holder. Loosen the small sets crews at the rim of each trim cover and arm assembly with the appropriate Allen key or a jeweler's screwdriver.
How do you attach a roller to a wall?
Repeat the procedure to secure the remaining mounting plate or arm at the wall. Fit each trim cover and arm assembly onto a mounting bracket and align the holes for the roller horizontally. Tighten the sets crews at the rim of each assembly. Reinstall the roller and paper at the arms of the holder.
How to remove mounting plate from wall?
How to install 2 1/2 inch toggle bolts?
How to remove trim cover and arm assembly?
Can toilet paper be stuck to plaster?
See more
About this website
Introduction
How annoying is it to place your toilet paper in places other than its holder? Want to solve this issue? In this guide, we will look at how to fix a broken or loose toilet paper holder by replacing the drywall anchors with newer, better ones. The process is relatively simple, although it does require hand stability to drill the wall properly.
Step 1 How to Fix a Broken Toilet Paper Holder
As you can tell, the left holder is loose. Replacing the anchor is much needed.
Step 3
After unscrewing the holder, take it off and begin unscrewing the screws in the wall. The type of screwdriver depends on the screws used.
Step 4
Remove the existing anchor and drill the top hole with the 5/16" drill bit. This will make space for the new anchor to be placed.
Step 5
After placing the new anchor in, align the clip accordingly and proceed to screw in the anchor, starting with the top hole and then the bottom hole.
Step 6
When you have completed the previous step for both sides, place the toilet paper holder in place and re-screw the Allen screw until both holders feel stiff.
How to remove mounting plate from wall?
Loosen and remove the screws that secure each mounting plate at the wall with a standard screwdriver and pull off the brackets. For standard holders with arms that attach to the wall with screws, loosen and remove the screws that secure each arm at the wall with a screwdriver.
How to install 2 1/2 inch toggle bolts?
To do this, unscrew and remove the spring-loaded wing nuts from each bolt and insert the ends of the bolts through the face of the plate or the arms. Screw the wing nuts onto the ends of each bolt.
How to remove trim cover and arm assembly?
Loosen the small sets crews at the rim of each trim cover and arm assembly with the appropriate Allen key or a jeweler's screwdriver. Pull off the assemblies to expose the mounting plates for each assembly. Sometimes the screws are on the bottom of the assembly and you may have to get down on your knees to see them, according to PH & G.
Can toilet paper be stuck to plaster?
Over time, toilet-paper holders that are installed with screws and plastic anchors can come loose from the wall. While this type of attachment may work in bathrooms with tile walls, it's not reliable with drywall or plaster.
How do toilet paper holders work?
Toilet paper holders are held in place by tiny screws that hold the decorative portion onto a wall bracket screwed into the wall. Normal pushing and pulling on the decorative arms during the placing and removing of toilet paper rolls can loosen the screws that hold the roll in place, making the holder too loose to do its job.
Why is my toilet siphoning out?
Community Answer. Because you have a venting problem in your plumbing system. Some other fixture is siphoning out and through the toilet. It could be a blockage in the venting, or it could be a lack of venting entirely, or just inadequate venting and the toilet is siphoning itself upon each flush.
Can you move toilet paper holder?
Don't move the toilet paper holder's location unless you are unable to get the wall anchor to hold properly . The decorative part of the toilet paper holder may not be able to cover the old holes, leaving them visible.
How to remove mounting plate from wall?
Loosen and remove the screws that secure each mounting plate at the wall with a standard screwdriver and pull off the brackets. For standard holders with arms that attach to the wall with screws, loosen and remove the screws that secure each arm at the wall with a screwdriver.
How to install 2 1/2 inch toggle bolts?
To do this, unscrew and remove the spring-loaded wing nuts from each bolt and insert the ends of the bolts through the face of the plate or the arms. Screw the wing nuts onto the ends of each bolt.
How to remove trim cover and arm assembly?
Loosen the small sets crews at the rim of each trim cover and arm assembly with the appropriate Allen key or a jeweler's screwdriver. Pull off the assemblies to expose the mounting plates for each assembly. Sometimes the screws are on the bottom of the assembly and you may have to get down on your knees to see them, according to PH & G.
Can toilet paper be stuck to plaster?
Over time, toilet-paper holders that are installed with screws and plastic anchors can come loose from the wall. While this type of attachment may work in bathrooms with tile walls, it's not reliable with drywall or plaster.
